Table of Contents
Advertisement
Network Printing in a Windows Environment (Available only with FAX3900)
IPP Printing
1
Connect the network cable. ("Connecting the Network Cable" on
page 2-2)
2
Specify the IP address, subnet mask, and default gateway settings for
the copier. ("Assigning an IP Address" on page 6-2)
3
Print the configuration page and check the settings. ("Printing the
Configuration Page" on page 5-7)
4
Install the printer driver. Add a network port during the installation of
the printer driver.
H
For details on installing the printer driver, refer to "Installing the
Printer Driver" on page 3-1.
NetWare Server/Client (except NDPS)
1
Connect the network cable. ("Connecting the Network Cable" on
page 2-2)
2
Specify the settings that enable the copier to connect to the NetWare
server. ("Setting Up the Network Connections" on page 6-12)
3
Set up the NetWare client so that it can print via the NetWare server.
("Setting Up the Network Connections" on page 6-12)
NetWare Server/Client (NDPS)
1
Connect the network cable. ("Connecting the Network Cable" on
page 2-2)
2
Specify the IP address, subnet mask, and default gateway settings.
("Assigning an IP Address" on page 6-2)
3
Print the configuration page and check the settings. ("Printing the
Configuration Page" on page 5-7)
4
Specify the settings that enable the copier to connect to the NetWare
server. ("Setting Up the Network Connections" on page 6-12)
5
Set up the NetWare client so that it can print via the NetWare server.
("Setting Up the Network Connections" on page 6-12)
6
6-11
Advertisement
Table of Contents
