Symbol LS 4008i Product Reference Manual page 39

Problem
Scanned data is
incorrectly displayed on
the host.
Note: If after performing these checks the symbol still does not scan,
contact your distributor or call the local Symbol Support Center. See
page xiv
Table 3-1. Troubleshooting (Continued)
Possible Causes
Scanner is not programmed to
work with the host. Check
scanner host type parameters
or editing options.
for the telephone numbers.
Maintenance and Technical Specifications
Possible Solutions
Be sure proper host is selected. (See the
host chapter for your scanner.)
For RS-232, ensure the scanner's
communication parameters match the
host's settings.
For a USB HID keyboard or a keyboard
wedge configuration, ensure the system
is programmed for the correct keyboard
type and language, and the CAPS LOCK
key is in the correct state.
Be sure editing options (e.g., ADF, UPC-
E to UPC-A Conversion) are properly
programmed.
3-3