Connecting Using Wand Emulation - Symbol LS 4008i Product Reference Manual

LS 4008i Product Reference Guide

Connecting Using Wand Emulation

To perform Wand Emulation, connect the scanner to a portable data terminal, or a controller
which collects the wand data and interprets it for the host.
Portable data
Terminal
1. Connect the Wand Emulation interface cable to the bottom of the scanner, as
described in
2. Connect the other end of the interface cable to the Wand port on the portable data
terminal or controller.
3. Scan the appropriate bar codes in this chapter to configure the scanner.
9-2
Wand port
Figure 9-1. Wand Emulation Connection
Installing the Interface Cable
Interface cable
on page 1-3.