Operating The Re-Print Function - Konica Minolta 7222 User Manual
Document folder operations
Hide thumbs
Also See for 7222:
- User manual (328 pages) ,
- Service manual (448 pages) ,
- Network setup manual (230 pages)
Table of Contents
Advertisement
Operating the Re-Print Function
When "Copy & Re-Print" method was selected at the time of copy operation, documents have
been stored in the Re-Print Box of the Document Folder. The documents stored in the Re-Print
Box can be printed when required, only the first page of a document can be printed to check the
contents, or the document can be deleted.
When you purchase the copier, it has been set so that the documents in the Re-Print Box are
automatically deleted after one day.
DETAILS
•
While the "Enhanced Security function" is set up, the Re-Print function cannot be used.
•
When you purchase the copier, it has been set to OFF so that you cannot use the re-print
function. To use the re-print function, you should set the re-print function to ON in the key
operator mode. For detail, see "Re-Print Setting" (p. 4-21).
Printing the Re-Print Documents
Documents stored in the Re-Print Box are printed in the following procedure.
1.
Press Document Folder on the copy screen.
2.
Press Re-Print.
3-22
Advertisement
Table of Contents
