Konica Minolta 7222 User Manual page 25

8.
When a box for which a password has been set is selected,
the Password Input screen is indicated.
Enter the password in the following procedure.
(1) Press Password.
(2) Enter the password (8 digits or less) and press OK.
DETAILS
•
Enter the password in 8 digits or less.
•
Use a password of 8 digits when the "Enhanced Security function" is being used.
9.
Set the copy function if required, set the original document
and press [START] on the control panel.
When selecting Copy & Box Store, the scanned document is copied and stored in the
specified box.
When selecting Box Store only, the scanned document is stored in the specified box.
HINT
•
Refer to "User's Guide (Copy Operations)" for the setting of the copy function.
•
Refer to p. 3-4 for the output of documents stored in the box.
Storing Copy Documents (continued)
2
Chapter
Storing
Documents in
Document
Folder
Storing Copy
Documents
Storing
Scanned
Document
2-9