FujiFilm FinePix S3000 Service Manual page 41

<Step 4>
Select the "Etc" tab (Fig. 3-(1)) in the "Customize" dialog
box that appears. Set the "Other" items (Fig. 3-(1)) as fol-
lows.
Item
Auto Measurement
Change mode(-U)
Use Japanese Fonts
Don't show OK NG
<Step 5>
Select the "Hardware" tab (Fig. 4-(1)) in the "Customize"
dialog box that appears.
Input the values for PI and P Board (Fig. 4-(1)).
PIO 0 10 12
PIO 1 11 13
Set the "Hardware" items (Fig. 4-(3)) as follows.
Item
Debug Mode
<Step 6>
Once the above settings have been made, click on "Apply"
(Fig. 4-(4)) in the "Customize" dialog box to complete setup.
This applies the setup, therefore setting is unnecessary from
the next time forward.
[Note]
If [Disable OKNG display] on the PC screen (Fig. 4) is set
to OFF, the PC screen displays [OK] if adjustment is OK,and
[NG] if adjustment is NG(either setting is OK).
Details
0
Do not check
Do not check
Check or Do not check
14 16
15 17
Details
Default
4.Adjustments
2
<Fig. 3>
1 2
<Fig. 4>
3
1
4
41