F3] Lcd Adjustment - FujiFilm FinePix S3000 Service Manual

4-14. [F3] LCD Adjustment

<Step 1>
Select [F3] LCD Adjustment on the [Adjustment Items Select] screen (Fig.5).
—> The [LCD Adjustment Preparation] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
<Note>
(1) Refer to the Setup Manual supplied with the jig for details of setting up the LCD automatic adjustment jig with the PC.
(2) If the LCD flicker image xD-Picture card has not been inserted in the camera, return to the [Jig Mode Setup] screen,
select the Jig mode again, and run LCD Adjustment.
—> LCD Adjustment is executed.
—> Write the adjustment data to the flash ROM when adjustment has been completed correctly.
—> The [LCD Adjustment Complete] screen appears.
<Step 3>
4.Adjustments
<Fig. LCD1>
<Fig. LCD2>
55