F8] Firmware Download - FujiFilm FinePix S3000 Service Manual

4-18. [F8] Firmware Download

[ Download and Extract ]
1) Download the firmware(archived file) from Web server (http://fujifilm-di.intranets.com/ ).
2) Extract the downloaded archived firmware.
3) The folder named ZJ00841-100 can be made by simply defrosting(Fig .FIRM1).
4) The imfidx10 folder is include in the folder ( ZJ00841-100 ).
5) The imfidx10 folder is copied onto xD picture card .
[Note]
The extract and the preservation method of the firmware are
described as an example of FinePix S3000.
Firmware in this server is archived file of ZIP from.
Therefore, after downloading this archived file from the Web
server, the extract of the file is necessary.
In the extract software, if the extract of the ZIP form
can be done, any software is OK.
Please prepare each one the extract software.
As the Firmware is different in each model, the archived file name
is also different.
(Caution)[ Important ]
*: Download should use xD picture card.
*: Please format xD picture card with the camera.
*: When the folder named imfidx10 is changed, the firmware cannot be download.
[ Caution ]
1. When downloading firmware, always insert a xD picture card containing the firmware to be downloaded in the
camera before setting the camera in the Jig mode.
2. Check the firmware version by setting the camera in the Jig mode and checking on the displayed
[Firmware Version Check Screen(Fig.FIRM2)]
4.Adjustments
<Fig. FIRM1>
<Fig. FIRM2>
Revised AUG,11,2004
63