Table of Contents
Advertisement
4358-5356 US All in One
7/26/10
Rear-Facing Installation
After deciding whether to use your Vehicle Belts or
LATCH, be sure to read the warnings below as they
pertain to both systems.
WARNING:
!
A loose top anchorage (tether) strap can
result in serious injury or death.
A loose LATCH system can result in
serious injury or death.
24
4:16 PM
Page 27
When LATCH is not
available, fasten belt hooks
together behind the child
restraint as shown.
NOTE:
Do not use the
top anchorage strap
(tether) in the rear-facing
position.The top
anchorage strap and hook
should be placed under
the child restraint.
Rear-Facing Installation with
Vehicle Belt:
Place child restraint rear-
1
facing in the back seat.
With child restraint in
the most reclined
position, make sure level
lines on shoulder belt
positioning guide are level
with ground. Adjust child
restraint if needed.
NOTE:
anchorage strap and
hook under the base.
Thread the vehicle lap or
2
lap/shoulder belt
combination through the
rear-facing belt slot.
Thread UNDER seat pad
3
between buckle strap and
rear slots and out
opposite side. Buckle
vehicle belt.
Do not place vehicle
belt over child's legs.
25
Tuck top
continued on next page.
Advertisement
Table of Contents
