Table of Contents
Advertisement
4358-5356 US All in One
7/26/10
5
6
strap: See "Adjusting Top Anchorage Strap" section.
7
If the child restraint does not remain tight, do not use
the child restraint in this seating location with this
LATCH system.
WARNING
!
LATCH hooks MUST be securely fastened.
Failure to do this can result in serious injury
or death.
36
4:16 PM
Page 39
Place one knee in the child
restraint and push down
firmly while pulling up on
the loop to tighten belt.
With knee still in child
restraint, attach hook to
anchor in vehicle. Push
down firmly and tighten
top anchorage strap.
To adjust top anchorage
With weakest hand at belt
path, tilt and push the
child restraint forward
and back, and from side to
side. If the LATCH belts
do not loosen, your child
restraint should be
secure.
NOTE:
Some "play" from
front to back or about an
inch from side to side is
acceptable.
After checking for hot
8
seat and buckles, place
your child in the child
restraint as described in
the "Securing Your Child
in the Child Restraint"
section.
To remove LATCH:
9
Push in on release button
and pull LATCH adjuster
away from child restraint
to loosen. Unhook
LATCH hooks.
37
Advertisement
Table of Contents
