Table of Contents
Advertisement
4358-5356 US All in One
7/26/10
3
Lower Harness Guides
4
5
50
4:16 PM
Page 53
Remove harness guides in
bottom of seat.
From the back of the seat,
locate the lower harness
guides that are between
the bottom of the seat and
base. Remove both lower
harness guides in bottom
of seat.
Push harness guide lip
toward outside of shell
with one hand while
pulling harness guide from
the front with the other.
Adjust backrest to lowest
position. Work pad off
shoulder belt positioning
guides and off of headrest.
Pull pad out from under
buckle cover and work it
off the shell.
From the back, use a
6
screwdriver to press in on
lip of harness guide and
pop guides through the
front. Pull cover off
headrest.
Hand wash with warm
sudsy water, rinse clean
and air dry. Do not use
bleach or other harsh
cleaners. Do not dry clean.
Spot clean harness straps.
Do not machine wash.
Replace seat pad by
reversing order:
Put pad on headrest and
replace harness guides.
Make sure harness
guide's tab goes over
metal bar.
Starting from bottom of
child restraint, slip pad on
shell; tuck in pad around
harness adjuster and over
upper belt guides. Make
sure pad is under headrest
and replace lower harness
guides. Rethread harness
(see belt-positioning
Metal Bar
booster section).
51
Advertisement
Table of Contents
