DJG Alpha Omega Instruction Manual page 25

4358-5356 US All in One 7/26/10
4
5
6
4:16 PM Page 49
With the sewn end of the
harness strap facing the
buckle, thread the harness
down through the slot on
the left side of shell.
Pull harness across the
bottom of the seat and up
through the slot on the
right side. Make sure
the harness is not
twisted.
Take both ends of the
harness strap and make
them even in length.
NOTE: Make sure the
harness adjustment strap
is between the harness
strap and shell as shown.
Harness adjustment
strap should not be
twisted.
From the back of the shell,
insert the harness covers
into the shell and head
rest cover. From the
front, pull the harness
covers completely through
the headrest.
46
Thread the harness straps
7
through each buckle
tongue from the bottom
up. Thread the chest clip.
DO NOT twist the
harness strap.
Thread harness strap into
8
the harness cover.
Push harness ends through
9
slot in headrest. Repeat
for other harness strap.
DO NOT twist the
harness strap.
47