Table of Contents
Advertisement
RADIO SET
TOOLS
NEEDED FOR
ASSEMBLY
Phillips type screwdrivers & hex wrenches
(Ref: TTR screw Drive Set )
TOOLS
INCLUDED IN
KIT
Hex Wrench
1.5mm, 2mm, 2.5mm,
3mm, 5mm
RADIO
1. When turning radio on, first turn on the transmitter and extend the transmitter antenna.
2. Then turn on the receiver (The switch is located on the bottom of the front flange unit).
One 12V sealed Lead-Acid battery is included in the kit to supply all the requiring battery
BATTERY
power for all the electric equipment and power drive system. During charging process, a
CHARGING
all night slow charger also be enclosed in the box. Please follow the operating description
to execute the battery charging process. DO NOT leave the charger unattended, DO NOT
operate the charging process in flammable environment.
WARNING
1. This radio control submarine is not a toy. If not properly assembled and operated, it is
2. You must choose the suitable and safety area to play the submarine. To avoid the
ITEMS & TOOLS REQUIREMENT
IMPORTANT NOTES & WARNING
When turning off, first turn the receiver off, then the transmitter.
capable of causing property damage. Thunder Tiger and it's distributor have no control
over damage resulting from shipping, improper construction, or improper usage.
dangerous of falling into the water.
Notice:
It need at least 4Ch or above radio
set to operate this model. For the
super combo version(5220-F), the
radio set already be included.
Needle Nose Pliers
Wire Cutter
4-way Cross Wrench
5-way Nut Wrench
Lexan Cutter/
Scissors
Thread Locking Glue
Wrench 17/19mm
Hide quick links:
Advertisement
Table of Contents
