Weight Installation; Front And Rear Cover Plate Assembly - THUNDER TIGER Neptune SB-1 Instruction Manual

6.3 MOTOR UNIT W/ REAR COVER PLATE
Note:
1. O-ring put on the FR/RR Flange unit first.
2. There is a little clearance for the tubes to move after
assembly. It's correct and means the seal O-ring on
the flange unit already be fully compressed to get the
good waterproof function.
1
6.4 FRONT & REAR COVER PLATE ASSEMBLY
6.5

WEIGHT INSTALLATION

Note: The weight position have to be
adjusted on the correct position.
x 1
M3x4mm M6
Socket Head Machine Screw Nut
Weight, B Weight, A Weight, C
2
x 8 x 8 x 2
Ø6mm Ø120mm
Washer O Ring Nylon Tie
Note: O-ring put on the FR/RR Flange unit first.
x 2 x 12
Ø124mm M6 Ø6mm
O Ring Nut Washer
x 4
M4x5mm
Socket Head Machine Screw
H
x 1
BAG
x 12 H
BAG
2 H
BOX BAG