Pre-Assembly Notes; Other Items Required; Tools And Supplies Needed - THUNDER TIGER 4315-Y Assembly Manual

Super cub ep
Table of Contents

Advertisement

PRE-ASSEMBLY NOTES

1. Please assemble your model according to this
instruction manual. Do not attempt to modify or change
your Super Cub in any way as doing so may adversely
change its flying characteristics.
2. For Ready To Fly ( Super Combo) version, some
assembly steps are finished by factory craftsman. We
recommend you to read the manual to familiarize
yourself with the airplane.
3. Before you begin please check entire contents of this
kit against the parts list and parts drawings to be sure
that no parts are missing or damaged. This will also
help you to become familiar with each component.
4. If you find that any par ts are either missing or
damaged, please contact with your dealer immediately
for replacement. Note: Your dealer cannot accept kits
from return if construction has begun.
e-mail:thundertiger@tiger.com
Remember we have worked very hard to make this model
as easy to assemble as possible while still maintaining our
high standard of quality. Your assembly of this model is
ver y impor tant and will determine the final flight
capabilities of your Super Cub, so use extra care and
follow the assembly procedure exactly.

OTHER ITEMS REQUIRED

Radio: You will need at least a 3
channel radio control system with 2
micro servos for your Super Cub.
No.8117 Micro Servo
ACE 8304 3ch Single
Stick Radio
3
3
2
8304
@ ? h e
? J 5 ? h e
. Y ? h e
? . Y h f
? 7 H ? h f
? . Y h g
J 5 h g
. Y ? h g
7 H
? J 5 ?
. Y ?
? . Y
? 7 H ?
? . Y
J 5
. Y ?
? J 5 ?
7 H
. Y ?
7 H
? . Y ?
? J 5 ?
8305
ESC-10: ACE ESC-10 ( P/N
ACE8015) with BEC for controlling
the power of your Super Cub as well
as eliminating the need of a
separate radio battery. The BEC(
Battery Eliminator Circuitry) in this
controller will automatically turn off
the power to the motor when the
battery reaches a factory present
discharge level leaving about 10 minutes of flight time for
the radio system.
10A
BEC
ACE 8015
Battery: We recommend the use of
a 7 cell 8.4V 600mAh AAA size
NiMH battery ( P/N ACE2924)
8.4V 600mAh AAA size
ACE 2924
Charger: You will need a quick
charger to charger your power
battery.
We recommend our
economical DC Quick Filed Charger
(P/N ACE 2604AC/B).
ACE 2604AC/B

TOOLS AND SUPPLIES NEEDED

Mixing Stick for Epoxy
Medium Grit Sandpaper
Rubbing Alcohol
Paper Towel
Hobby Knife
1/16" drill bit 1.5mm
Ruler
Pen, Pencil or Marker
Small Screw Drivers
Scissors
Needle Nose Pliers
ACE
ACE
ACE 8305 3ch
Dual Stick Radio
12V
900mAh

Advertisement

Table of Contents
loading

Table of Contents