Propulsion System W/Rear Cover Assembly; Motor W/Drive Cup; Motor Mounting W/Drive Shaft; Motor Unit W/Rear Cover Plate - THUNDER TIGER Neptune SB-1 Instruction Manual

5
PROPULSION SYSTEM W/REAR
COVER ASSEMBLY
5.1

MOTOR W/DRIVE CUP

IDØ3.17mm
x 1
M3x3mm
Set Screw
5.3 MOTOR UNIT W/ REAR COVER PLATE
BOX 4
Propulsion Motor,
qty 1
5.2

MOTOR MOUNTING W/DRIVE SHAFT

4 G
M3x3mm
BOX BAG
Set Screw
M3x16mm
BT P.MACHINE SCREW W/Wahser
BAG G
Grease
IDØ4mm
x 1 x 2
Ø3mm M3x12mm
O Ring BT PHILLIP TAP SCREW w/washer
Ø3mm Washer(3)
x 3 x 1
O Ring Set.
Drive Shaft,
qty 1
Motor Mount, RR Cover Plate,
qty 1 qty 1
Drive Cup, Drive Cup(motor),
(IDØ4mm) (IDØ3.17mm)
qty 1 qty 1
Dogbone, Sealed Rubber,
qty 1 qty 1
Fill the grease
into the inner
hole about 1/3 full.
x 2
G
BAG
G
x 3 x 3
BAG
Ø3mm M3
Washer Lock Nut