Table of Contents
Advertisement
FUSELAGE
II. Pushrod Housing Installation
R
A.
Carefully install rudder and elevator pushrod tubes; insert the ele-
vator pushrod tube through the hole in the rear former through the
fuselage and out the pre-drilled hole in the right of the rear cabin for-
mer.
B.
With a hobby knife, remove covering from existing slot in top rear
of fuselage and insert rudder pushrod tube through fuselage and out
pre-drilled hole in left rear cabin former. Use just a dab of CA glue to
hold pushrod tubes in place.
L
A. File the motor mount at the beam as shown for better fitness.
4
III. Motor Installation
Advertisement
Table of Contents
