Using Cable Splicers - Raymarine C-series Installation Manual

87020-3.book Page 27 Tuesday, March 7, 2006 11:02 AM
Chapter 3: Installation
C-Series cable connections

Using cable splicers

The cable splicers are used to make the connections from the SeaTalk/Alarm out and
NMEA 0183 cables easy and secure, without removing insulation from cable tails.
Note:
To use these connectors:
Power (1.5m)
Supplied
Not supplied/accessory
Do not use cable splicers on any cables other than SeaTalk/Alarm out and NMEA 0183.
2
SeaTalk Seatalk/Alarm out
(2m)
R G Y
cable splicer
D6615_1
27
Digital Sounder
Module (DSM)
NMEA
(1.5m)