Attaching The Front Bezel - Raymarine C-series Installation Manual

87020-3.book Page 24 Tuesday, March 7, 2006 11:02 AM
24
Fixing bolts
When console mounting your C-Series Display, avoid damaging the rear trim ring by
using the correct length bolts. The length used is dependant upon bulkhead thickness:
Bulkhead Thickness (mm)

Attaching the front bezel

After you have installed the C-Series Display in the required position, you should attach
the front bezel as follows:
1. Carefully lift one edge of the screen protection film, so that it is accessible for
removing when unit installation is complete.
0-3
3-7
7-11
11-15
15-19
19-23
C-Series Displays Installation Manual
Bolt length (mm)
12
16
20
24
28
32
D6760-1