Chapter 3: Installation
C-Series cable connections
Using cable splicers
The cable splicers are used to make the connections from the SeaTalk/Alarm out and
NMEA 0183 cables easy and secure, without removing insulation from cable tails.
Do not use cable splicers on any cables other than SeaTalk/Alarm out and NMEA 0183.
Note:
To use these connectors:
Power (1.5m)
Supplied
Not supplied/accessory
2
SeaTalk
Seatalk/Alarm out
(2m)
R
G
cable splicer
D6615_1
Digital Sounder
Module (DSM)
Y
NMEA
(1.5m)
27