Front Bezel - Raymarine E90W Installation Instructions Manual

4.4 Front bezel

Attaching the front bezel
Before fitting the bezel you must have mounted the unit in its
required location.
1. Carefully lift one edge of the screen protection film, so that it is
accessible for removing when unit installation is complete.
2. Place the bezel over the front of the display, ensuring that the
clips along the bottom edge of the bezel are latched into position.
Location and mounting
3. Ensure that the control buttons pass through their respective
openings.
4. Apply firm but even pressure to the bezel along the:
i. Outer edges - work from the sides upwards and then along
the top edge, to ensure that it clips securely into position.
ii. Inner edges - particularly along the chart card door edge, to
ensure that the bezel sits flat.
5. Check that all control buttons are free to operate. Use your
thumb or forefinger in a circular motion to do this.
51