Call Display Service; Using Call Display Service - Panasonic KX-TG6591C Operating Instructions Manual

Using Call Display
service
Important:
R This unit is Call Display compatible.
To use Call Display features, you
must subscribe to a Call Display
service. Contact your service provider/
telephone company for details.
Call Display features
When an outside call is being received,
the caller's name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
R If the unit cannot receive caller
information, the following is displayed:
– "Unavailable": The caller dials
from an area which does not
provide a Call Display service.
– "Private caller": The caller
requests not to send caller
information.
– "Long distance": The caller
makes a long distance call.
R If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
If a call is not answered, the unit treats it
as a missed call. The display shows
"Missed call". This lets you know if
you should view the caller list to see who
called while you were away.
Note:
R Even when there are unviewed
missed calls, "Missed call"
disappears from the standby display if

Call Display Service

the following operation is performed
by one of the registered handsets:
– Being replaced on the base unit or
charger.
– Pressing MOFFN on a handset.
Phonebook name display
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Talking Call Display
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Call Display service of
your service provider/telephone
company.
– turn this feature on (page 25).
When caller information is received, the
unit announce the caller's name or
phone number received from your
service provider/telephone company
following every ring.
R Name pronunciation may vary. This
feature may not pronounce all names
correctly.
R Call Display service has a limit of how
many characters can be displayed. If
the caller's name is too long, the
handset may not be able to display or
announce the entire name.
R The announcement is heard at the
same level as the ringer volume
(page 15, 25).
R If you turn on the answering system
and set the number of rings
"2 rings" (page 39), the unit does
not announce the caller information. If
"Toll saver" is selected and there
is a new message, the unit does not
announce the caller information.
R When you receive a call while on the
phone, the 2nd caller's name is not
31