Answering Calls - Panasonic KX-TG6591C Operating Instructions Manual

2
When the other party answers,
speak into the microphone.
R Speak alternately with the other
party.
3
When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from
the base unit to the handset:
– Press M N on the handset, then
press MSP-PHONEN on the base
unit with the privacy mode off
(page 26).
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press MjN or MkN repeatedly while
talking.

Answering calls

Using the handset
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and press M
M N when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to
9, *, or #. (Any key answer
feature)
2
When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting
the handset off the base unit or charger.
You do not need to press M
this feature on, see page 25.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to
select the desired volume.
n Programming the volume
beforehand:
1
MMENUN#160
2
MbN: Select the desired volume.
3
MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing M N.
Using the base unit
When a call is being received, the
SP-PHONE indicator flashes rapidly.
1
Press MSP-PHONEN when the unit
rings.
2
Speak into the microphone.
3
When you finish talking, press
MSP-PHONEN.
Adjusting the base unit ringer volume
Press MjN or MkN repeatedly to select
N or
the desired volume.
R To turn the ringer off, press and hold
MkN until the unit beeps.
Note:
R Even when the ringer volume is set to
off, the base unit still rings for
intercom calls (page 43).
N. To turn
Making/Answering Calls
15