Table of Contents
Advertisement
accidents are caused by poorly maintained
electrical tools.
J
Use electrical tools, accessories, aids, etc. in ac-
cordance with these instructions and as directed
for this special appliance type. Take considera-
tion thereby of the working conditions and the
task to be completed. The use of electrical hand
tools for purposes other than those originally
intended can lead to dangerous situations.
Appliance-specific Safety
Instructions
To avoid the risk of injury or fire as well
as health risks:
J
When working outdoors, connect the appli-
ance via a residual current circuit-breaker with
a maximum breaking current of 30 mA.
J
Only use an extension cord certified for use
outdoors.
J
Secure the workpiece firmly. Use clamps / vices
to firmly hold the workpiece. It is thus better
secured than just with your hand.
J
Never support your hands next to or in front of
the device or on the surface being worked as
there is a risk of injury in the event of slipping.
J
In case of danger, immediately pull the power
plug from the socket.
J
Always run the power cord away from the
appliance to the rear.
J
Fire hazard due to flying sparks!
When sanding metals, there is a risk of flying
sparks. For this reason, always make certain
that no one is at risk and that no flammable
materials are located near the working area.
J
m Warning! Toxic vapours! Working with
harmful / toxic dusts results in health hazards
for the person operating the appliance and for
other persons in the area.
Wear safety glasses and a dust
protection mask!
J
When working for extended periods on wood
and, in particular, materials that produce dusts
that are hazardous to health, connect the
appliance to an appropriate external suction
device.
J
Ensure sufficient ventilation when working on
plastics, paints, lacquers, etc.
J
Do not soak materials or surfaces to be worked
with liquids containing solvents. Heating during
sanding can give rise to vapours that are toxic
or hazardous to health.
J
Avoid sanding of lead-based paints or other
materials that are hazardous to health.
J
Material containing asbestos may not be worked
on. Asbestos is considered a carcinogen.
J
The appliance is designed for dry surface
sanding of wood, plastic, metal and smoothing
compounds as well as painted surfaces.
J
Never work on moistened materials or wet
surfaces.
J
Always hold the appliance firmly with two
hands while working (see also Fig. D, E).
J
Always switch off the appliance and allow
the sanding pad
9
setting down the oscillating sander.
J
Always pull the power plug out of the socket
for all work pauses, before any work on the
appliance (e.g. changing the sanding paper)
and when not in use.
J
The appliance must always be kept clean, dry
and free of oil or lubricating greases.
J
Always stay alert! Always pay attention to
what you are doing and act with common
sense. Never use the appliance when you are
distracted or don't feel well.
Service
J
Arrange for your appliance to be repaired only
by qualified specialists and only with original
spare parts. Thus, you can be certain that the
safety of your appliance is assured.
J
Always have the plug or power cord replaced
by the manufacturer of the appliance or the
manufacturer's customer service. Thus, you can
be certain that the safety of your appliance is
assured.
Safety Instructions
to come to a stop before
GB/IE
9
Advertisement
Table of Contents
