Page 1
Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Validity date of the Information: 06 / 2007 · Ident.-No.: XQ 310-062007-1 / UK / IE Oscillating sander OscillatinG sander XQ 310 Operating and safety instructions Before you begin reading this information, please unfold the page with the illustrations and familiarize yourself with all functions of the tool.
Introduction Intended use ... Page Features ... Page Package contents ... Page Technical data ... Page Safety instructions Safety at the Workplace ... Page Electrical Safety ... Page Safety of Personnel ... Page Carefull Handling and Use of Electrical Hand Tools ... Page Appliance-specific Safety Instructions ...
Technical Data Nominal voltage: 230 V ~ 50 Hz Nominal power: 310 W Idle speed: 6,000 - 11,000 rpm Idle oscillation speed: max. approx. 22,000 rpm Oscillation circle: 2.1 mm Sanding paper size max.: approx. 280 x 115 mm Protection class: II / Information on sound levels and vibration: A-weighted noise level.
Safety Instructions When working outdoors, use only extension cords which are certified for use outdoors. The use of an extension cable suitable for employ- ment outdoors reduces the risk of electrical shock. Warning! - Never open the appliance. Arrange for repair or component replacement work to be carried out by the service centre or specialists for electrical repairs.
Always switch off the appliance and allow the sanding pad to come to a stop before setting down the oscillating sander. Always pull the power plug out of the socket for all work pauses, before any work on the appliance (e.g. changing the sanding paper) and when not in use.
Safety Instructions / Operation Original ancillaries / and accessories Only use accessories and tools that are specified in the operating instructions. The use of tools and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. Any questions? You may begin the work once you have famil- iarised yourself with the instructions, functions...
(see also Fig. D, E). Move the oscillating sander parallel, in flat circles or alternating between lengthwise and side-to-side motions. Do not press down with the oscillating sander. The sanding pads become clogged, which reduces the sanding performance. Clean the sanding pad the vacuum cleaner.