Automatic Main Beam Control - Ford Galaxy Owner's Manual

Switch off the ignition and move the wiper
lever to position A within three seconds.
Release the lever when the windshield
wipers have moved to the service position.
See Changing the Wiper Blades (page
52).
Autolamps
The headlamps will come on and go off
automatically depending on the ambient
light.
See Lighting Control (page 55).
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
At a Glance

Automatic main beam control

The system does not relieve you of
your responsibility to drive with due
care and attention. A manual
override may be necessary if the system
fails to switch the main beam on or off.
The system will automatically switch on
main beam if it is dark enough and no other
traffic is present. If it detects an
approaching vehicle s headlamps or tail
lamps, or street lighting ahead the system
will switch off main beam before it can
distract other road users. Dipped beams
will remain on.
See Automatic High Beam Control
(page 56).
Direction indicators
Note: Tap the lever up or down to make the
direction indicators flash only three times.
Power windows
Note: To reduce wind noise or buffeting
when just one window is open, open the
opposite window slightly.
See Power Windows (page 75).
14
WARNING