Using The System; System Detection And Alerts - Ford Galaxy Owner's Manual

Hide thumbs Also See for Galaxy:
Table of Contents

Advertisement

Using the system

The system displays a yellow indicator
located in the exterior mirrors.
Note: Both indicators will illuminate briefly
when you switch the ignition on to confirm
that the system is operational.
Note: On vehicles with automatic
transmission, the system is active only in S,
D and N.
The system is only active when you exceed
10 km/h (6 mph). The system is
temporarily deactivated when you select
reverse gear.

System detection and alerts

The system will trigger the alert for vehicles
that enter the blind spot zone from the rear
or merge from the side. Vehicles that you
pass, or vehicles that enter the blind spot
zone from the front, will only trigger the
alert after the vehicle has remained in the
blind spot zone for a short period of time.
Note: Vehicles that pass through the blind
zone quickly (typically less than 2 seconds)
will not trigger the alert.
The system consists of two radar sensors
each located behind the rear wheels
hidden behind the bumpers.
CAUTIONS
Do not place items such as bumper
stickers in this area.
Repairs to these areas using body filler
will affect the performance of the
system.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Windows and Mirrors
81
Detection limitations
There may be certain instances where
vehicles entering and exiting the blind spot
zones may not be detected.
Instances which may cause non-detection:
Debris build up on the rear bumper
panels in the area of the sensors.
Certain manoeuvring of vehicles
entering and exiting the blind zone.
Vehicles passing through the blind zone
at high speed.
Severe weather conditions.
Several vehicles passing through the
blind zone following each other closely.
False alerts
Note: False alerts are temporary and will
self correct.
There may be certain instances when the
system will alert with no vehicle present in
the blind zone.
Circumstances where false alerts may
occur:
Road guardrails.
Highway concrete walls.
Construction areas.
Sharp turns around a building.
Bushes and trees.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S-max

Table of Contents