Using The Telephone - Ford Galaxy Owner's Manual

Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Using the station storage button
Note: This process is only for audio units
without a telephone keypad.
1. Press the PHONE button on the audio
unit.
2. Press the preset number required
(using the station preset buttons 1 - 6).
Using the audio unit menu
Note: After bonding a phone to the system,
this becomes the active phone.
1. Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the ACTIVE PHONE option on
the audio unit.
4. Scroll through the different stored
phones by using the seek buttons to
display the bonded phones.
5. Press the MENU button to select the
phone which is to be the active phone.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the DEBOND option on the
audio unit.
4. Scroll through the different phones by
using the seek buttons and display the
phone to be debonded.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Telephone
5. Press the MENU button to select the
phone which is to be debonded.
Debonding a bonded phone - Sony
radio
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE button.
2. Press the up/down arrow buttons until
you reach the DEBOND option.
3. Scroll through the different phones by
using the seek buttons and display the
phone to be debonded.
4. Press the OK button to be debond.

USING THE TELEPHONE

This chapter describes the phone functions
of the Navigation System.
Note: Refer to your Navigation System
guide for details of the controls.
An active phone must be present.
Even if connected to the navigation
system, your phone can still be used in the
usual way.
Making a call
Dialing a number
Phone numbers can be dialed using voice
control. See Voice control (page 299).
Ending a call
Calls can be ended by pressing either the
END button, the MODE button on the
remote switch or the ON/OFF button on
the navigation system.
Redialing a number
1. Press the PHONE button on the unit.
2. Select REDIAL.
297