Ford Galaxy Owner's Manual page 300

Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by pressing
either the call accept button, the MODE
button on the remote control, the PHONE
button on the unit or by using the ACCEPT
option in the menu.
Rejecting an incoming call
Incoming calls can be rejected by pressing
either the call reject button, the CD or
AM/FM buttons on the unit, or by using
the REJECT option in the menu.
Receiving a second incoming call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call, whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by pressing either the call accept button,
the MODE button on the remote control,
the PHONE button on the unit or by using
the ACCEPT option in the menu.
Note: This will cancel the ongoing call.
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing either the call reject button, or one
of the following buttons on the unit: CD,
AM/FM.
Muting the microphone
During a call, it is possible to mute the
microphone. Whilst muted, confirmation
will appear in the display.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Telephone
SD navigation units
Press the mute button (symbol of a
microphone with a line through it). Press
the button once again to turn this function
off.
CD navigation units
Press the microphone mute button. Press
the button once again to turn this function
off.
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Note: After bonding a phone to the system,
this becomes the active phone.
1. Press the PHONE button on the unit.
2. Using the BT SETTINGS option in the
menu, select the active phone from the
list.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1. Press the PHONE button on the unit.
2. Select the BT SETTINGS option in the
menu.
3. Select the DEBOND option in the
menu.
4. Select the phone from the list.
298