Automatic High Beam Control - Ford RANGER 2024 Owner's Manual

2. Press Zone Lighting.
E397816
A On and off button.
B Contextual help.
C Exterior lamp indicators.
D All zones on and off.
E Individual zones on and off.
You can use zone lighting when your
vehicle is on or off. When your vehicle is
off, the lighting switches off after a certain
period of time to avoid draining the battery.
Note: You can also use individual zone
controls to switch on each zone.
Note: Make sure to remove exterior lighting
covers when using zone lighting.
Note: When your vehicle is off and the timer
has one minute remaining, the turn signals
flash six times.
Note: Indicators on the touchscreen
illuminate when the lights outside of the
zone lighting control are on.
Note: You can remotely control the zone
lighting using the FordPass app.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Exterior Lighting
Note: Vehicles without mirror puddle lamps
only have two zones.
Zone Lighting Settings
Scroll down within the zone lighting
application to access zone lighting
settings.
Enable Autolamp Override
This setting allows the vehicle to override
the autolamps when zone lighting is on.
When you access zone lighting for the first
time, you can choose this setting. You can
change this setting at any time.
Include Reverse Lamps
This setting turns the reverse lamps on
when you switch the rear lighting zone on.
Switch this setting off if you have a backup
alarm installed to prevent the reverse
lamps from turning on and sounding the
alarm when using zone lighting.
AUTOMATIC HIGH BEAM
CONTROL
HOW DOES AUTOMATIC HIGH
BEAM CONTROL WORK
Automatic high beam control turns the
high beams on if it is dark enough and no
other traffic is present. If it detects an
approaching vehicle's headlamps or tail
lamps, or street lighting ahead, the system
turns the high beams off.
A camera sensor, centrally mounted
behind the windshield of your vehicle,
continuously monitors conditions to turn
the high beams on and off.
101