Traffic Information Control - Ford Galaxy Owner's Manual

The sound is muted and AUTOSTORE will
be shown in the display while the unit
searches through the frequencies.
When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
6000CD
Press and hold the RADIO button.
Sony CD
Press and hold the AST or RADIO button.
TRAFFIC INFORMATION
CONTROL
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic program information.
Activating traffic announcements
Before you can receive traffic
announcements, you must press the TA
button. Either TA-D or TA-L will be shown
in the display to indicate that the feature
is switched on.
If you are already tuned to a station that
broadcasts traffic information, TP will also
be shown in the display. Otherwise the unit
will search for a traffic program and display
TP SEEK while doing so. If it cannot locate
such a station, NOT FOUND will be shown
in the display.
TP will be shown within a box in the display
when you are tuned to a station providing
traffic information from a linked RDS (radio
data system) or EON (enhanced other
network) station.
When traffic information is broadcast, it
will automatically interrupt normal radio,
tape or CD playback and TRAFFIC or
NEWS will be shown in the display.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Audio unit operation
If the traffic signal weakens, TP will flash
in the display. Press the seek up or seek
down button (the left or right navigation
button on Sony or Sony DAB audio units)
to find another station.
Note: If this happens during CD or AUX
playback or, on certain models, with the
radio volume set to zero, the unit will retune
automatically if the station is not available.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless TA
is turned off, then on again.
Note: If TA is on and you select a preset or
manual tune to a non TA station no traffic
announcement will be heard.
Local or distant traffic
The number of RDS or EON traffic
announcements may become excessive
in some areas so there is an option to
select between local traffic information
and all available information.
6000CD
1.
2. Press the MENU button repeatedly
3. Press the seek up or seek down button
4. Press the MENU button or allow the
Note: Either TA-L or TA-D will be shown in
the display.
280
Press and hold the MENU button until
the display changes.
until TA is shown in the display.
to select either local (TA LOCAL) or
distant (TA DIST) traffic
announcements.
menu to time out to confirm your
selection.