Sample Pages - Xerox ColorQube 8580 User Manual

Features

Sample Pages

You can use sample pages to demonstrate the quality of graphics, speed of continuous output, and color
sample charts of the printer.
Sample Page Name
Graphics Demonstration
Office Demonstration
2-Sided Demonstration
Print Mode Demonstration
CMYK Sampler Pages
RGB Sampler Pages
PANTONE Color Sampler Pages
1. At the printer control panel, to navigate to the Information Menu, use the arrows, then press OK.
Navigate to Sample Pages, then press OK.
2.
3. Navigate to the desired sample page, then press OK.
4. Select an option.
Single Print: This option prints a single-page sample print. To print, press OK.
−
− Continuous Print: This option outputs the sample page repeatedly. To stop the print job, on
the control panel, press the Cancel button.
Note: Continuous Print applies to the Graphics Demonstration, Office Demonstration, and 2-Sided
Demonstration sample pages only.
®
26 Xerox ColorQube 8580/8880 Color Printer
User Guide
Description
This option prints a graphics-quality image.
This option prints an office-quality image.
This option demonstrates printing on both sides of the paper.
Note: This option requires that the 2-sided printing option is installed.
This option prints Office Demonstration pages in each of the four
print-quality modes: Fast Color, Standard, Enhanced, and Photo. You
can use this mode to demonstrate printer speed and resolution.
This selection prints a multi-page CMYK color sampler chart.
This selection prints a multi-page RGB color sampler chart.
This selection prints a multi-page PANTONE/256 color sampler chart.