Assigning A Static Ipv4 Address Manually - Xerox ColorQube 8580 User Manual

Color printer
Hide thumbs Also See for ColorQube 8580:
Table of Contents

Advertisement

Assigning a Static IPv4 Address Manually

By default, the printer is set to acquire an IP address from the network server using DHCP. Network
addresses assigned by DHCP are temporary, however. After a specified time, the network could assign a
new IP address to the printer. If the print driver is set to an IP address that changes periodically, you can
experience connectivity issues. To avoid problems, or if your network administrator requires a static IP
address for the printer, you can assign the IP address to the printer.
You can assign a static IP address to your printer from the printer control panel. Once an IP address is
assigned, you can change it using CentreWare Internet Services.
To assign a static IP address to the printer, you need the following information:
An IP address properly configured for your network
The Network Mask address
The default Router/Gateway address
If you are on a network managed by a network administrator, contact your network administrator to
obtain the network information.
For a home network using routers or other devices to connect the printer to the network, refer to the
device instructions on assigning network addresses. The router or device documentation can give you a
range of acceptable address numbers you can use. It is important that the addresses be similar to the IP
addresses used by other printers and computers on the network, but not the same. Only the last digit
must be different. For example, your printer can have the IPv4 address 192.168.1.2 while your computer
has the IP address 192.168.1.3. Another device can have the IP address 192.168.1.4.
The router could assign the static IP address of the printer to another computer that obtains its IP
address dynamically. To avoid having the IP address reassigned, give the printer an address at the
higher end of the range allowed by the router or device. For example, if your computer has IP address
192.168.1.2, and your device allows IP addresses to 192.168.1.25, select an address between
192.168.1.20 and 192.168.1.25.
In IPv6 network configurations, the IPv6 address is assigned automatically. For a protocol other than
IPv4, refer to the System Administrator Guide. For details, see the Help in CentreWare Internet Services.
See also:
®
ColorQube 8580 Color Printer:
Xerox
®
Xerox
ColorQube 8880 Color Printer:
www.xerox.com/office/CQ8580docs
www.xerox.com/office/CQ8880docs
Xerox
Installation and Setup
®
ColorQube 8580/8880 Color Printer
37
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 8880

Table of Contents