Sample Pages; Power Saver Settings - Xerox Phaser 4510 User Manual

1.
2.
3.
Note:
the printer driver.

Sample Pages

Your printer comes with a set of sample pages that demonstrate different printer functions.
To print the sample pages:
1.
2.
3.
See also:

Power Saver Settings

Factory Default:
You can change the default power saver time on the control panel or through CentreWare IS.
Using the Control Panel:
1.
2.
3.
4.
Using CentreWare IS:
1.
2.
3.
4.
5.
6.
7.
Downloaded From ManualsPrinter.com Manuals
On the control panel, select
Select
Information Pages
Select Configuration Page
print.
You can also print information pages from CentreWare Internet Services (IS) and from
On the control panel, select
Select , and then press the OK button.
Sample Pages
Select the desired sample page, and then press the OK button to print.
Advanced Features Guide at
■ Power Saver: On
Power Saver Timeout: 4 minutes
■
On the control panel, select
Verify that Power Saver is
the OK button to switch between
Select Power Saver Timeout
Press the OK button.
Launch your web browser.
Enter the printer's IP address in the browser's Address field.
Select Properties.
Select the General folder on the left nagivation panel, then click Printer Defaults.
In the User Preferences section, set the Power Saver option to On.
Select the new time from Power Saver Timeout.
Click the Save Changes button.
, and then press the OK button.
Information
, and then press the OK button.
or Supplies Usage Page
, and then press the OK button.
Information
www.xerox.com/office/4510support
>
Printer Setup Printer Controls
On . If Power Saver is Off
and .
Off On
to select the new time.
Phaser® 4510 Laser Printer
1-9
Control Panel
, and then press the OK button to
, then press the OK button.
, then select Power Saver and press