Transparency Images Are Too Light Or Too Dark; Colors Are Incorrect Or Inaccurate - Xerox ColorQube 8580 User Manual

Troubleshooting

Transparency Images are Too Light or Too Dark

Probable Causes
Paper type is set incorrectly in the print driver.
The paper type that is set for the paper tray is incorrect.
The transparency type that is used is unsupported.
See also:
Guidelines for Printing Transparencies

Colors are Incorrect or Inaccurate

Probable Causes
The wrong color ink is loaded into one of the ink loader
slots.
The color correction settings are incorrect.
For online support information go to:
®
• Xerox ColorQube 8580 Color Printer:
®
• Xerox ColorQube 8880 Color Printer:
See also:
Adding ColorQube Ink
Image and Color Options
®
158 Xerox ColorQube 8580/8880 Color Printer
User Guide
on page 72
www.xerox.com/office/CQ8580support
www.xerox.com/office/CQ8880support
on page 112
on page 91
Solutions
Before you print the job, in the print driver or software
application, for paper type, select Transparency.
At the printer control panel, ensure that the paper type
for the paper tray that contains transparencies is set to
Transparency.
Only use transparencies that are recommended for solid
ink printers.
Solutions
Open ink loader door C, then ensure that each ink slot
contains the correct color ink.
Adjust the color correction settings.