Troubleshooting
Ink or Debris is on the Page
Probable Causes
The paper release blade is dirty.
The job is set to print 2-sided manually on pre-printed
paper but the paper type is not set to 2nd Side.
See also:
Cleaning the Paper Release Blade
Using Manual 2-Sided Printing
Removing Print Smears
Predominant Light Stripes with Ink Missing from the Print
Probable Causes
There is dirt or debris in the exit door area.
The printhead is dirty.
See also:
Cleaning the Paper Release Blade
Eliminating Light Stripes
®
156
Xerox
ColorQube 8580/8880 Color Printer
User Guide
on page 105
on page 90
on page 160
on page 105
on page 160
Solutions
Clean the paper release blade.
• To print on pre-printed paper, in the print driver or at
the control panel, select 2nd Side as the paper type.
• To clean ink smears, at the control panel, use the
Remove Print Smears procedure.
Solutions
Open the exit door, then remove debris from the
paper-exit area.
At the control panel, run the Eliminate Light Stripes
procedure.