Wireless; Overview; What You Can Do In This Chapter; Controller Screen - ZyXEL Communications ZyWALL 1100 User Manual

8.1 Overview

Use the Wireless screens to configure how the ZyWALL/USG manages the Access Points (APs) that
are connected to it.

8.1.1 What You Can Do in this Chapter

• The Controller screen
connect to the network.
• The AP Management screen
ZyWALL/USG.

8.2 Controller Screen

Use this screen to set how the ZyWALL/USG allows new APs to connect to the network. Click
Configuration > Wireless > Controller to access this screen.
Figure 126 Configuration > Wireless > Controller
Each field is described in the following table.
Table 68 Configuration > Wireless > Controller
LABEL
Registration
Type
ZyWALL/USG Series User's Guide
(Section 8.2 on page
(Section 8.3 on page
DESCRIPTION
Select Manual to add each AP to the ZyWALL/USG for management, or Always Accept to
automatically add APs to the ZyWALL/USG for management.
Note: Select the Manual option for managing a specific set of APs. This is recommended as the
registration mechanism cannot automatically differentiate between friendly and rogue
APs.
APs must be connected to the ZyWALL/USG by a wired connection or network.
C
H A PT ER
150) sets how the ZyWALL/USG allows new APs to
151) manages all of the APs connected to the
8

Wireless

150