ZyXEL Communications ZyWALL 1100 User Manual page 549

Table 223 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
Pre-Authentication
OK
Cancel
33.3.2.4 MAC Filter List
This screen allows you to create and manage security configurations that can be used by your
SSIDs. To access this screen click Configuration > Object > AP Profile > SSID > MAC Filter
List.
Note: You can have a maximum of 32 MAC filtering profiles on the ZyWALL/USG.
Figure 360 Configuration > Object > AP Profile > SSID > MAC Filter List
The following table describes the labels in this screen.
Table 224 Configuration > Object > AP Profile > SSID > MAC Filter List
LABEL
Add
Edit
Remove
Object Reference Click this to view which other objects are linked to the selected MAC filtering profile (for
#
Profile Name
Filter Action
Chapter 33 Object
DESCRIPTION
This field is available only when you set Security Mode to wpa2 or wpa2-mix and
enable 802.1x authentication.
Enable or Disable pre-authentication to allow the AP to send authentication
information to other APs on the network, allowing connected wireless clients to switch
APs without having to re-authenticate their network connection.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new MAC filtering profile.
Click this to edit the selected MAC filtering profile.
Click this to remove the selected MAC filtering profile.
example, SSID profile).
This field is a sequential value, and it is not associated with a specific profile.
This field indicates the name assigned to the MAC filtering profile.
This field indicates this profile's filter action (if any).
ZyWALL/USG Series User's Guide
549