ZyXEL Communications ZyWALL 1100 User Manual page 517

Make sure the bridge interfaces of the master ZyWALL/USG (A) and the backup ZyWALL/USG (B)
1
are not connected.
Configure the bridge interface on the master ZyWALL/USG, set the bridge interface as a monitored
2
interface, and activate device HA.
Configure the bridge interface on the backup ZyWALL/USG, set the bridge interface as a monitored
3
interface, and activate device HA.
Connect the ZyWALL/USGs.
4
Chapter 32 Device HA
A
B
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
ZyWALL/USG Series User's Guide
517