ZyXEL Communications ZyWALL 1100 User Manual page 338

Figure 224 Configuration > Security Policy > ADP > Profile > Add-Protocol-Anomaly
The following table describes the labels in this screen.
Table 139 Configuration > Security Policy > ADP > Profile > Add-Protocol-Anomaly
LABEL
Name
Description
TCP Decoder/UDP
Decoder/ICMP Decoder
Activate
Chapter 19 Security Policy
DESCRIPTION
A name is automatically generated that you can edit. The name must be the
same in the Traffic Anomaly and Protocol Anomaly screens for the same ADP
profile. You may use 1-31 alphanumeric characters, underscores(
(-), but the first character cannot be a number. This value is case-sensitive.
These are valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
• These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
In addition to the name, type additional information to help you identify this ADP
profile.
Perform the following actions for each type of encoder.
To turn on an entry, select it and click Activate.
ZyWALL/USG Series User's Guide
338
), or dashes
_