Wireless Station Info - ZyXEL Communications ZyWALL 1100 User Manual

Table 51 Monitor > Wireless > Radio List
LABEL
OP Mode
Profile
Frequency Band
Channel ID
Station
Rx PKT
Tx PKT
Rx FCS Error Count
Tx Retry Count

6.13.3 Wireless Station Info

This screen displays information about connected wireless stations. Click Monitor > Wireless >
Station Information to display this screen.
Figure 104 Monitor > Wireless > Station List
The following table describes the labels in this screen.
Table 52 Monitor > Wireless > Station List
LABEL
#
MAC Address
Associated AP
SSID Name
Security Mode
Signal Strength
IP Address
Tx Rate
Rx Rate
Association Time
Chapter 6 Monitor
DESCRIPTION
This field displays the operating mode of the AP. It displays n/a for the profile
for a radio not using an AP profile.
AP Mode means the AP can receive connections from wireless clients and pass
their data traffic through to the ZyWALL/USG to be managed (or subsequently
passed on to an upstream gateway for managing).
This field displays the AP Profile for the Radio. It displays n/A for the radio profile
not using an AP profile. It displays default if using a default profile.
This field displays the WLAN frequency band using the IEEE 802.11 a/b/g/n
standard of 2.4 or 5 GHz.
This field displays the WLAN channels using the IEEE 802.11 protocols.
This field displays the station count information.
This field displays the data packets of incoming traffic on the AP.
This field displays the data packet of outgoing traffic on the AP.
This field displays the erroneous data packet count received and detected by
Frame Check Sequence (FCS)
This field displays the data packet count that were transmitted for retry.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific station.
This field displays the MAC address of the station.
This field displays the APs that are associated with the station.
This field displays the SSID names of the station.
This field displays the security mode the station is using.
This field displays the signal strength of the station.
This field displays the IP address of the station.
This field displays the transmit data rate of the station.
This field displays the receive data rate of the station.
This field displays the time duration the station was online and offline.
ZyWALL/USG Series User's Guide
122