Entering Radio Hardware Information - Cisco Aironet 1200 Series Software Configuration Manual

Chapter 3 Configuration
Service Set ID (SSID)

Entering Radio Hardware Information

OL-2159-01
The SSID is a unique identifier that client devices use to associate with the access
point. The SSID helps client devices distinguish between multiple wireless
networks in the same vicinity. The SSID can be any alphanumeric entry from two
to 32 characters long.
You can also enter this setting on the Express Setup page.
You use the AP Radio Hardware page to assign settings related to the access
point's radio hardware.
Figure 3-11 The AP Radio Hardware Page
Cisco Aironet 1200 Series Access Point Software Configuration Guide
Figure 3-11 shows the AP Radio Hardware page.
Radio Configuration
3-21