Settings On The Ap Radio Hardware Page - Cisco Aironet 1200 Series Software Configuration Manual

Radio Configuration

Settings on the AP Radio Hardware Page

Cisco Aironet 1200 Series Access Point Software Configuration Guide
3-22
Follow this link path to reach the AP Radio Hardware page:
On the Summary Status page, click Setup.
1.
On the Setup page, click Hardware in the AP Radio row under Network
2.
Ports.
The AP Radio Hardware page contains the following settings:
Service Set ID (SSID)
•
• Allow Broadcast SSID to Associate?
Enable World Mode
•
• Data Rates
• Transmit Power
Frag. Threshold
•
• RTS Threshold
• Max. RTS Retries
Max. Data Retries
•
• Beacon Period
Data Beacon Rate (DTIM)
•
Radio Channel
•
Search for Less-Congested Radio Channel
•
Restrict Searched Channels
•
• Receive Antenna and Transmit Antenna
The AP Radio Hardware page also contains a link to the AP Radio Data
Encryption page, which you use to enter Wired Equivalent Privacy (WEP)
settings.
Chapter 3 Configuration
OL-2159-01