Mazda 6 Installation Instructions Manual page 9

Hook A
(1)
Glove compartment
Vehicle front
(2)
Glove compartment
(3)
(4)
Vehicle front
Glove compartment removal
1. Push the glove compartment in the direction of the arrow (1)
2. Pull the stay damper in the direction of the arrow (2) shown in
Hook A
Hook A
(1)
Stay damper
Hook B
3. Pull down the glove compartment in the direction of the arrow
4. Pull the glove compartment in the direction of the arrow (4) and
Hook C
and hooks A (2 locations).
the figure and remove the hook B (1 location).
CAUTION
 If the glove compartment is closed without being joined
to the stay damper, the stay damper may be damaged.
Verify that the stay damper is joined to the glove
compartment before closeing the glove compartment.
(3).
remove it while detaching hooks C (2 locations).
9