Mazda 6 Installation Instructions Manual page 19

Inspection Parts
Remote Start Transmitter
Remote Start Transmitter
Remote Start Transmitter
※ Troubleshooting note
If a malfunction is verified in the above, refer to the "Troubleshooting manual" *Note issued by Mazda, and
perform troubleshooting.
*Note): Refer to "Troubleshooting manual" on the vehicle accessory Web.
Inspection Items
2. Perform the vehicle condition check using the
Operation check
3. With all of the following conditions met, start
・ Parking brake is applied
・ Shift lever is in the P position
・ Key is in the vehicle
Operation check
・ Brake pedal and accelerator pedal are not
・ Push button start is not pressed
・ All of the doors, the bonnet, and the hood are
4. Stop the engine using the remote controller and
Operation check
Inspection
remote controller, and verify if the "Engine stop"
mark is indicated in the answer back display
and if the error indication "t" is displayed.
the engine using the remote controller and
verify that the engine starts.
depressed
closed and locked.
verify that the engine stops.
Check