Mazda 6 Installation Instructions Manual page 10

Hook A
(2)
Hook A
Guide C
Pin B
(2)
(3)
Vehicle left
Lower panel (Passenger's side)
Bolts A
Vehicle front
Clip B Hook C
Air bag deactivation (PAD) switch
Clips B
Guide E
(3)
Clip B
(4)
Lower panel (Passenger's side)
Vehicle front
Dashboard under cover removal
(1)
Hook A
Pin B
Vehicle front
Lower panel (Passenger's side) removal
Pin D Guide E
Clips B
Hook C
(2)
(1)
Pin D
1. Detach hooks A (2 locations) in the direction of arrow (1)
shown in the figure.
2. Pull the dashboard under cover in the direction of arrow (2)
while detaching pins B (2 locations).
3. Remove the dashboard under cover in the direction of the
arrow (3) shown in the figure while detaching the guide C (1
location).
4. Remove the dashboard under cover.
CAUTION
 Be careful not to damage guide C when removing hooks
A and pins B. If the dashboard under cover is pulled
forcibly downward, it could damage guide C.
1. Remove bolts A (2 locations).
Bolt tightening torque : 2.0 - 6.0 N･m
2. Disconnect the passenger air bag deactivation (PAD) switch
connector. (with passenger air bag deactivation (PAD) switch)
3. Pull the passenger's side lower panel in the direction of the
arrow in the order of (1), (2), (3), (4) and remove it while
detaching clips B (2 locations), hook C (1 location), pin D (1
location) and guide E (1 location).
10