Mazda 6 Installation Instructions Manual page 15

RES ECU installation position
Vehicle front
Align RES ECU with
dashboard line
Align RES ECU with
Vehicle front
end of dashboard
Tie wraps (White)
Vehicle wiring harness
Harness 12P Connector
Vehicle front
Vehicle wiring harness
2 pin Connector (Option)
Vehicle left
Harness 2 pin connector
7. Degrease the RES ECU installation position at the upper back
RES ECU
Dashboard
8. Connect the harness 12 pin connector to the RES ECU.
RES ECU
9. Secure the harness to the
10. Connect the harness 2 pin connector to the vehicle wiring
Harness
TEMP Sensor
Vehicle front
of the glove compartment (dashboard) using primer, and affix
double-sided adhesive tape of the RES ECU.
CAUTION

Use 3M Promoter-4298 for primer.

When degreasing using primer, only apply primer to the
degreased area to prevent other parts from becoming
discolored.

After degreasing using primer, let it dry for 1 min. or more.

Affix double-sided adhesive tape firmly.
(White).
harness 2 pin Connector (Option).
15
vehicle wiring harness using a
tie wraps