Mazda 6 Installation Instructions Manual page 7

Main fuse cover
Tab
Vehicle front
Bolts
Fresh air duct
Fastener A
Vehicle front
Screw
Vehicle front
Grille bracket
Vehicle front
Fresh air duct
Grille bracket
Fastener B
Screw
③ Main fuse cover removal
1. Detach the main fuse cover tab (1 location), and lift the rear
part of the main fuse cover to remove it.
④ Bolt and fastener removal
1. Remove the fresh air duct bolts (2 locations).
Bolt tightening torque : 7.8 - 10.8 N･m
2. Remove the grille bracket fastener A (1 location).
3. Remove the grille bracket fastener B (1 location) and screws (2
locations).
Screw tightening torque : 4.0 - 9.8 N･m
7