Mazda 6 Installation Instructions Manual page 8

(1)
Front scuff plate
(4)
(3)
Clip G
Tab E
Hook F
Hook B
Front scuff plate
Clip C
Pin H
Clip G
Tab E
Hook F
Cap nut Clip
Front side trim
Seaming welt
Vehicle front
Tab A
Hook B
(2)
Pin D
Clip C
Pin H
Vehicle front
Tab A
Pin D
Front side trim
(Backside)
Clip
Front scuff plate (Passenger's side) removal
1. Take the shaded area shown in the figure, detach tab A while
pulling the front scuff plate in the direction of the arrow (1)
shown in the figure, then detach the hook B, clip C, and pin D
while pulling in the direction of the arrow (2).
2. Take the shaded area shown in the figure, detach tab E while
pulling the front scuff plate in the direction of the arrow (3)
shown in the figure, then detach the hook F, clip G and pin H
while pulling in the direction of the arrow (4).
Front side trim (Passenger's side) removal
1. Partially peel back the seaming welt.
2. Remove the cap nut (1 location).
3. Pull the front side trim in the direction of the arrow shown in the
figure and remove it while detaching the clip (1 location).
8