Map Display During Route Guidance; Navigation Tools; Route Information; Speed Limit - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Map display during route guidance

Map display during route
guidance
During a navigation, the map display shows differ-
ent navigation tools and route information.
Caution
The information on the digital road maps may no
longer be current due to short-term changes (con-
struction, etc.)!
Additional information, e.g. the speed limit, can
be shown only if they are contained in the map
material.
The traffi c situation and the local signpost infor-
mation have priority over the information of the
Lucca.

Navigation tools

The following navigation tools are shown on the
map:
The so-called "carsor" represents your po-
sition.
Compass:
Always points north (for orientation)
Top fi eld: Name of next street
Bottom fi eld: Name of current street
Action arrow:
Next action and remaining distance to
that action
When you come closer to the location of the next
action, a bar is shown on the right side: The fewer
yellow segments are displayed, the closer you are
to the location of the next action.
28
Voice output is activated.
Voice output is deactivated (muted).
Touching the symbol reactivates the voice
output.

Route information

The lower display bar shows the following route
information by default:
• Remaining distance to desti-
nation.
• Estimated time of arrival
Instead of the arrival time, you can also display the
remaining driving time.
For route guidance with several interim destina-
tions, the route information for the next interim
destination is displayed. In addition, you can show
the distance and time for the last destination.
For settings, please read the chapter "Working
with the map", "Map settings".

Speed limit

The speed limit is shown in the left area of
the map.
Note:
This information can be displayed only if it
is activated in the navigation settings. (Ch.
"Working with the map", "Performing map
settings")